Post by davidm on Dec 12, 2010 8:18:49 GMT -5
Hi Guys
I was wondering if there is any way to "smooth out" the operation of gauges (e.g. MAP, RPM) in virtual cockpits? The reason I'm asking is because I recently downloaded Jens Kristiansen's DeHavilland Comet and noticed that in the 2D cockpit screen only 3 of the 4 thrust (RPM?) gauges show up, the fourth guage somewhere off the screen to the right. I know that the plane is designed to be flown from the VC but the gauge operation is very jerky and it's really difficult to get them set to proper values for takeoff, climb, cruise, etc.
I have the same problem in most of the planes, but since all the gauges are in the 2D cockpits I don't need to use the VC's too much.
DaveM
I was wondering if there is any way to "smooth out" the operation of gauges (e.g. MAP, RPM) in virtual cockpits? The reason I'm asking is because I recently downloaded Jens Kristiansen's DeHavilland Comet and noticed that in the 2D cockpit screen only 3 of the 4 thrust (RPM?) gauges show up, the fourth guage somewhere off the screen to the right. I know that the plane is designed to be flown from the VC but the gauge operation is very jerky and it's really difficult to get them set to proper values for takeoff, climb, cruise, etc.
I have the same problem in most of the planes, but since all the gauges are in the 2D cockpits I don't need to use the VC's too much.
DaveM