|
Post by cj241101 on Jul 2, 2019 10:41:31 GMT -5
Any way of changing the en route frequencies in FS2004? I am particularly keen to remove those with the .025 spacing which weren't around in the classic era I am working on e.g. "contact London Control on 118.825" etc. Airport and initial departure frequencies I can change using AFCAD; it's just the en route ones that I would like to amend.
|
|
|
Post by Tom/CalClassic on Jul 2, 2019 11:18:56 GMT -5
You might be able to decompile the ATC Center BGL (whatever that one is for that area) and edit the XML directly, then recompile? Backup first.
|
|
|
Post by abbotsford on Jul 2, 2019 12:04:43 GMT -5
|
|
|
Post by Tom/CalClassic on Jul 2, 2019 12:39:41 GMT -5
No, EVP can't change the frequencies used, unfortunately.
|
|
|
Post by Bjoern on Jul 3, 2019 12:44:33 GMT -5
This is the only thead I could find about MSFS's Flight Information Regions: www.fsdeveloper.com/forum/threads/flight-information-region-fir.440877/While it does not mention frequencies, in one of Luka's posts, there is reference to bvcf.bgl. This file could also store the center frequencies next to the airspace boundaries mentioned in the thread. Googling "fs2004 bvcf.bgl" yields a few results and apparently, the file may be decompiled and compiled with BGL2XML or any other suitable tool. In any case, you'll be in for a bit of work.
|
|