|
Post by jwh on Aug 5, 2019 2:45:00 GMT -5
With my new install have found that the "Brakes" box in the lower left hand corner remains on. When I start a flight the "Parking Brake" message is showing and then that is removed okay with the full stop key.
But when I touch the toe brakes the "Brakes" signal comes on and stays there after releasing the toe brakes. Have calibrated the pedals and gone through all variations of the assignments but still cannot resolve the problem. I recall something similar happening several years ago but Have no recollection as to how I fixed it. It is probably something simple that is staring me in the face that i can't see.
If anyone can point me in the right direction it would be much appreciated.
Thanks John
|
|
|
Post by Tom/CalClassic on Aug 5, 2019 9:16:08 GMT -5
Hi,
I had to delete the calibration and leave them that way. Others have been able to use paid FSUIPC to get them working.
|
|
|
Post by jwh on Aug 5, 2019 23:59:12 GMT -5
Hi Tom Thanks for your reply. How do you delete the calibration? This is something new to myself. I gather the brakes still work after doing this.
John
|
|
|
Post by jwh on Aug 6, 2019 4:58:29 GMT -5
Hi Tom Have solved the problem. Found the old thread from 2013 when I last had the problem and at the end of it was a comment about deadzones. That is when the penny dropped. Knew it had to be something simple and it was. Still banging head on desk!!!!!
John
|
|