|
Post by jsaus on Apr 24, 2024 18:08:22 GMT -5
Sounds like you're not using Tom's most recent B377 ual download dated 6/21/2013. It should use B377_panel and you should have a folder in Gauges called XML. No, do not change the files in Z_DC6KM. They're correctly set up for the Wright R3350 series. Sorry I haven't got an older B377 panel so can't tell you what to change. Best to download the latest. Bill Oh my gosh. I thought I DID have it, tried it and its a zillion times better. Not sure how I missed it.
|
|
|
Post by Defender on Apr 25, 2024 5:10:12 GMT -5
Glad it helped and thanks for letting us know.
You still need to correct the BMEP gauges so that full power gives 235 BMEP. If or when you do I suggest you rename the edited gauge (and the panel's gauge listing!) to something like BMEP12_R4360 to remind folks that it is only for use with that engine. That's where Bruce Smythe went wrong it seems.
Bill
|
|
|
Post by Tom/CalClassic on Apr 25, 2024 9:09:15 GMT -5
As Bill says, if you want accurate BMEP gauges, you probably need a set for each engine type. Make copies of the ones in the KM folder, rename them with 4360 in the titles, and make the suggested change to the code. Then change the references in the 377 panel.cfg file.
And Iām glad the latest version is working for you. š
|
|
|
Post by Defender on Apr 25, 2024 10:17:07 GMT -5
Remember that in the panel for the latest B377 release you've just installed, the BMEP gauges are listed in the panel.cfg as coming from the Gauges/XML folder and not the DC6KM folder.
Bill
|
|
|
Post by Tom/CalClassic on Apr 25, 2024 11:49:55 GMT -5
Yes, sorry.
|
|