ADE not showing all runways

[Deleted]

I created this airfield, but he ADE shows only one of the three runway. It isn't the first that it happens like that. 




Has anyone an idea about what could be wrong? Thanks for any advice.

Bernard

[Tom/CalClassic]

Check the elevation of each runway in Properties and make sure they are at the airport elevation.

If it is not in a flattened area try putting an apron under each runway, which will flatten the runway area.

[stansdds]

I agree, it is quite likely an elevation issue.

[Deleted]

Thanks for your replies.

I had to flatten the whole airfield area anyway. Otherwise the lonley runway and the taxiways would be shown partially. Forthermore, when I reduce runway widths and add taxiways instead, the "fake runways" are shown correctly. As said before, it happens when  I add more than just on runway. Really strange.



Of course, I can live with it, but it's just not entirely satisfactory.

Bernard

[Tom/CalClassic]

I don’t understand what you are trying to do. All airport objects must be at the same elevation for AI aircraft anyway, so a flatten is the logical solution.

If you don’t want to flatten everything, placing aprons underneath the runways can solve that. Aprons and taxiways will pull the earth up or down to the airport elevation, but not runways. The aprons can hide underneath the runways, invisible.

[Deleted]

The whole area is flattened. Otherwise the aircraft wouldn't match with the ground. 



Bernard

[Tom/CalClassic]

Not true. The area around the aprons, runways, and taxiways does not need to be flattened, if desired. But it is typically done for appearance.

[Deleted]

Thanks Tom, you did your best. Probably one of my bad questions! Sorry for having waisting your time.

Bernard

[Tom/CalClassic]

Never a waste of time to learn new things.