|
Post by haddock on Apr 3, 2010 8:40:43 GMT -5
Hi there!
Time by time I'm installing the classic sceneries, take a look on it and enjoy it. Yesterday I was installing the Shannon airport (EINN) and was surprised to be alone there. Only the classic facilities and equipment but not only one airplane except mine, neither parked nor taxiing nor flying.
On all other airports I've installed there is AI traffic and parked airplanes but in the Shannon scenery: Nothing. Also if I press "CTRL-W" to switch to other AI planes there were no other planes. I changed location to KLAX, there were a lot of planes moving and flying. Then changing back to EINN, no planes anywhere, neigher on ground nor in air.
Bug or feature? Or is something going wrong with my installation? Any ideas?
Greetings Haddock
|
|
|
Post by Tom/CalClassic on Apr 3, 2010 11:57:05 GMT -5
What year is your traffic? By 1962 there wasn't much stopping at Shannon. However, even then there are 200 movements in and out of the airport each week, so you certainly should find at least one aircraft there. Try changing the time of day (and changing the day itself).
In 1962 at 0910 GMT on a Wednesday, I find three aircraft - TWA 707, PAA cargo DC-6A, and a Seaboard World CL-44.
Hope this helps,
|
|
|
Post by haddock on Apr 3, 2010 14:36:38 GMT -5
Hi! Thanks Tom you are right. I was trying it with another date and than there were at least 3 parked airplanes. (Hmpf...sometimes yourself didn't see the easiest way...) Greetings Haddock
|
|