|
|
Post by dc6tryer on Dec 11, 2009 12:30:28 GMT -5
Hi, Is it possible to do? I downloaded Lee Swordy's AFCAD but haven't read up about it yet.  Thank you for your thoughts, Andy. |
|
|
|
Post by dc6tryer on Dec 11, 2009 13:26:19 GMT -5
Hi, Is it as easy as it seems? Just open the program,choose your runway and add the ILS or whatever. If it is, I'm  at asking for advice! Andy. |
|
|
|
Post by Tom/CalClassic on Dec 11, 2009 15:10:15 GMT -5
If you want only the ILS frequency for you to fly down, then that is all there is. It will not add the ILS to ATC, though (the runway will still be closed in IMC). For that you could also use ILS Approach Creator to make a simple ILS approach for the runway. Or if you have an approach plate you could use ADE9X and create the actual real life ILS approach.
Hope this helps,
|
|
|
|
Post by dc6tryer on Dec 11, 2009 16:22:33 GMT -5
Hi, Thanks for the info Tom, I've used that Program--ILS creator-- to make 3 new ILS approaches in the outback in Russia. Well, I say I've made,but in reality I've clicked a few buttons and it's Martin Gleeson who should be thanked for this wonderful program! And Lee Swordy for AFCAD too. Thanks again.  Fuel up the trusty steed and Hi Oh Silver...away  Andy. (sometimes I get a bit over-excited) |
|
|
|
Post by Tom/CalClassic on Dec 11, 2009 16:31:56 GMT -5
Glad to help.  |
|
|
|
Post by dc6tryer on Dec 11, 2009 17:42:32 GMT -5
Hi, I've tried compiling them 2or 3 times now- the 3 airports I've tried- and even though it seems to produce a .bgl file in the right place, the ILS feather doesn't show up and, of course!, I've no idea of the frequency. Ah ha..dim light glows feebly Should I be using AFCAD to get the frequency perhaps as Martin's program just makes the approach? and the feather won't show up on the map at all anyway?  Andy. edit; 1 hour later! After using the Ils program I went back to AFCAD and did what i should have done first time out and that was to save the files! What a fantastic couple of programs these are ILS feathers now show up on the maps etc etc. A. |
|
|
|
Post by Tom/CalClassic on Dec 11, 2009 19:25:10 GMT -5
Glad you figured it out. AFCAD creates the frequency and the green feathers on the map, ILS Approach Creator creates the ATC approach.
|
|
|
|
Post by dc6tryer on Dec 15, 2009 15:25:58 GMT -5
Hi, in fact it all went downhill from that high point! Now the ilsgps11 screen shows an error message that stops movement to the next page..I think it has some files in the registry which stop it being completely uninstalled to try again.. I posted a couple of screenshots in the FlightSim 'Scenery ' Forum, but have had no response from that and the e-mail for Martin is nonfunctioning also  Andy. |
|
at asking for advice!
