|
Post by Willem Kelder on Feb 8, 2009 7:04:16 GMT -5
Hallo,
Every time when i select the aircraft i have a black square on the panel just below the RMI. This is not only the case on the B377/C97 but also on other aircraft panels. Some years ago i tryed via some forums to get a solution, but this was that time difficult to give Perhaps someone can help me.
PS: i made a screen dump but i do,t no how to show it on message screen
|
|
|
Post by Tom/CalClassic on Feb 8, 2009 10:07:25 GMT -5
Hi,
To post images look at the Rules and Information thread at the top of each forum - Section #3.
You must be using a panel different from mine. My 377 panels don't have an RMI - they have the 3 Cessna nav gauges.
|
|
|
Post by Willem Kelder on Feb 8, 2009 11:42:51 GMT -5
Mr Tom,
Thanks for reply.
Sorry but i do not use a other panel. And i mend the Cessna Nav gauge.
|
|
|
Post by emfrat on Feb 8, 2009 16:40:56 GMT -5
Hi Willem - In my setup, the 377 has a clock in that position. Do you have a clock at some other position on the panel? In your Gauges folder, do you have one named propliner.clock.gau ?
MikeW
|
|
|
Post by Tom/CalClassic on Feb 8, 2009 23:51:34 GMT -5
Hi,
If you don't have that gauge in your Gauges folder, download and install my silver top United B377 from my Stratocruiser page. It will install that gauge for you.
Hope this helps,
|
|
|
Post by Willem Kelder on Feb 9, 2009 7:45:09 GMT -5
[ ] Hallo, This is the screen dump i made from the default B377/C97 panel. And you will see a black window under the Cessna gauge. I can move this window like the GPS or Radio panel and right click it and remove it. This will not only happen on this panel but it will also appear on other ad-on panels
|
|
|
Post by Hans Verheij on Feb 9, 2009 14:06:05 GMT -5
Willem , I may be wrong but I believe I had the same a couple of years ago. You must NOT be in full screen. Go with your mouse on the black square and right click,if I remember well it will show as another window, close this on the X. If another black square appears, do the same,when there is no longer a black square visible,return to full screen and save this situation.Next time it will start without the black squares.
Hope it helps.
Hans.
|
|
|
Post by qxtoolman on Feb 10, 2009 2:07:58 GMT -5
It looks like a pop-up window trying to display. Make sure your throttle, radio, GPS, etc. in the panel cfg file is OK. Look in all those windows for the line: visable 1, it should read: visable 0. I hope this helps.
|
|
|
Post by Willem Kelder on Feb 10, 2009 15:21:03 GMT -5
Hallo, Thanks for the reply,s. This is what i found it is a mini panel "multi engine prop aircraft" and this will also appear on other panels. So i think i have to set something in FS9 to zero to keep it out of view. But i do,t no where, I found a mine panel gauge in the gauge map but after removing this everything is still the same. So
|
|
|
Post by Tom/CalClassic on Feb 10, 2009 17:39:30 GMT -5
Hi,
It appears you have installed an add in I know nothing about, sorry...
|
|
|
Post by emfrat on Feb 11, 2009 2:17:57 GMT -5
Willem, Tom -
I had a quick look around the 'Net this morning before work. All I found in freeware (avsim, flightsim) was an mini-panel addon for multi-engine jets, but a search in Google also found a free upgrade for the MAAM B-25, which included a mini-panel using 'the MAAM B-25 gauges instead of the Cessna 172 ones'.
Looks like a good suspect - hope this helps.
Cheers MikeW
|
|
|
Post by Willem Kelder on Feb 13, 2009 14:33:02 GMT -5
Hallo,
Thanks for the reply,s I found the problem after the the tip "use not the full screen mode" ect ect. I found after a long search two folders inside the main aircraft folder called "default and default org" inside those folders where two folders called "panel" and in those folders where two panel .cfg file with the names of the so called "mine panels". After removing them, on all the ad-on panels the black window disappeared. Thanks for help.
|
|
|
Post by Tom/CalClassic on Feb 13, 2009 15:21:27 GMT -5
Hi,
Glad you got it figured out. An addon Gremlin, for sure...
|
|